Performance Intercooler Kit Mishimoto Mitsubishi Lancer Evolution X / 08+ / Black

Features
- Direct fit for the 2008+ Mitsubishi Lancer Evolution X
- 10 whp and 10 tq bolt-on power increase
- Efficient 89mm thick bar-and-plate core provides optimal heat dissipation and low AITs
- Full aluminium cast end tanks provide increased durability and smooth, uninterrupted airflow
- Strategically designed fins for minimal pressure loss
- Substantial core volume will support vehicles up to 600 whp
- Bead-rolled pipe ends prevent boost leaks and coupler disconnection
- Silicone couplers provide increased heat and pressure tolerance
- Available with a powder-coated finish in Sleek Silver or Stealth Black

Overall Size: 719 x 348 x 114mm (w/o mounting pegs)
Core Size: 495 x 305 x 89mm
Weight: 10,45kg
Construction: Bar and Plate with Cast End Tanks
Inlet: Inlet 63,5mm O.D. / 60mm I.D.
Outlet: Outlet 63,5mm O.D. 60mm I.D.
Pipe Construction: Polished Aluminium
Tank Wall Thickness 3.5mm

Upper Pipes Silicone Couplers
Upper Coupler 1: 44mm / 62mm, 54mm / 72mm
Upper Coupler 2: 62mm, 72mm
Upper Coupler 3: 62mm, 72mm

Lower Pipes Silicone Couplers
Lower Coupler 1: 62mm / 69mm, 72mm / 79mm
Lower Coupler 2: 62mm, 72mm
Lower Coupler 3: 62mm, 72mm

Pipe Diameter
Inner Diameter: 60mm
Outer Diameter: 63,5mm

Fin Specs
External: 2,5 fins per cm
Internal: 2,9 fins per cm

Engine Code
4B11T

Chassis Code
CZ4A

Purchase Includes Mishimoto Intercooler
CNC Mounting pegs
(4) Polished Aluminium Pipes
(6) Silicone Couplers, Black
(10) 70mm T-Bolt Clamps
(1) 51mm T-Bolt Clamp
(1) 76mm T-Bolt Clamp

Fits
2008+ Lancer Evolution X GSR
2008+ Lancer Evolution X MR

Installation Torque Specs
3N*M recommended for all t-bolt and constant tension t-bolt clamps.These clamps have an operating range of 2-4N*M. Do not exceed the maximum torque rating of 4N*M.

Note
This intercooler can be used with OEM or aftermarket intercooler pipes. The CNC mounting pegs must be installed by the customer.

Description
A high-horsepower Evo demands an intercooler setup that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high boost pressures often have increased air intake temperatures (AITs) and heat soak, both of which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit. This intercooler kit is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 89mm thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminium end tanks provide superior durability and smooth, uninterrupted airflow.

The intercooler core is a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. This kit also features polished 63,5mm mandrel-bent aluminium piping and four-layer 100% silicone couplers with heat-resistant embedded fibers. These couplers offer increased heat and pressure tolerance compared to the factory rubber connections. Dependable charge-air connections are essential for reliable operation. The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit provides a dyno-proven increase of 10 whp and 10 tq, and it will support modified vehicles up to 600 whp! Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler kit will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in Sleek Silver or Stealth Black.