+ UK Based with no import Fee + ×

Garrett GT6041 Turbo 1.25 A/R T5/T6 Singlescroll - 730496-5001 / 731377-5002



£ 2,340.41
excl. 20% VAT , plus shipping costs
£ 2,808.49
incl. 20% VAT , plus shipping costs
Stk
Status:
will be reordered for you (more information)
Order within the next x hours x minutes x seconds and your package will arrive on 05.07.2025

Garrett Turbo GT6041 730496-5001 / 731377-5002

Genuine Garrett turbocharger

Garrett item number: 731377-5002
CHRA number: 730496-5001
Wastegate: extern
Performance range: 1350-2000PS
Engine displacement: 6.0L - 12.0L
Compressor: inlet 105,70mm / outlet 141,20mm, Trim 56, A/R 1.05
Turbine: diameter 129,50mm, Trim 84, A/R 1.25
Flange type: T5/T6 Singlescroll
Weight:
Bearing housing: oil cooled
Note: largest available Garrett turbocharger

You purchase this article directly by Garrett part number as offered and delivered by www.turbobygarrett.com. If you are looking for a specific turbocharger without knowledge of the corresponding part number we suggest you contact us via phone or email.

Video
Turbocharger selection made easy: Try our TurboGuide
Which turbocharger is better? BorgWarner, Garrett or another one?
TwinScroll vs SingleScroll housing | Turbocharger simply explained
What should I pay attention when installing a motorsport turbocharger?
What are the advantages of a turbo with ball bearings? Better than journal bearings? | Turbocharger simply explained
Which oil restrictor do I need?
What does T25, T3, T4 flange mean? | Turbocharger simply explained
What does the A/R value mean - more power vs. response | Turbocharger simply explained
Extended tip technology on the compressor wheel of the turbocharger | Turbocharger simply explained
Internal and external wastegate + actuators | Turbocharger simply explained

PDF
Garrett torque specs for screws and nuts

Features
Accessory
Banjo Bolt for Water Cooling Garrett and BorgWarner
Banjo Bolt M18x1,5
Banjo Fitting M18 -> 10mm
Banjo Fitting M18 -> 10mm
Banjo fitting with M18 to Dash 8 connector black
Complete DIY oil return line kit for T3 / T4...
Complete DIY oil return line kit for T3 / T4...
Copper Washer 18mm
Oil feed adapter flange GTW / T3 / T4 / KKK
Oil feed adapter with restrictor for Garrett GT37 / GT40...
Oil Feed Line Gasket T3 / T4 / from GT37R
Oil inlet restrictor 1,6mm - for T3, T4, GT37, GT40,...
Oil inlet restrictor 1,6mm - for T3, T4, GT37, GT40,...
Oil return adapter T3 / T4 - pipe short | BOOST products
Oil Return Adapter T3 / T4 / KKK Male Thread | BOOST...
Oil Return Adapter T3 / T4 / KKK with Female Thread |...
Oil return flange T3 / T4 pipe flexible - short version
Oil return flange T3 / T4 pipe flexible - short version
Oil return line gasket T3 / T4 / from GT37R
Screw-in adapter 1/2" NPT for oil return line
Screw-in adapter 1/2" NPT for oil return line
Screw-in Adapter M18 x 1,5 to Dash 8 / -08 AN
Screw-in Adapter M18 x 1,5 to Dash 8 / -08 AN
Screw-in Adapter18x1,5 to 11mm Push-on Hose Connector
Turbo Blanket T5/T6 - lava
Turbo Blanket T5/T6 - lava
Turbo Heat Shield Titanium - Single T5/T6
Secure your £10 voucher!
newsletter
£10 Voucher with Newsletter Registration

With subscribing into our free newslerrs you will receive a £10 voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.

Loading ...