VAG Diagnostic Gateway Cable MFD28/32 GEN2
Allows you to keep your diagnostic port free by connecting directly to the drivetrain instead of the diagnostic bus
Further development of the well-known CANchecked VAG-OBD cable
The VAG Diagnostic Gateway cable harness is the logical further development of our well-known VAG-OBD cable. One end has the 8 and 10 pin Molex connectors for our MFD28 and MFD32 displays, the other end is a Y-cable that allows us to loop the display into the gateway. With this cable harness, it is possible to keep the diagnostic port free and to tap CAN High/Low as well as 12V ignition power and ground directly from the drivetrain instead of the diagnostic bus. The advantages are obvious: data retrieval is faster, and you can also use this cable harness if you have a programmable ECU installed in your vehicle.
- Availability: to order
With subscribing into our free newslerrs you will receive a £10 voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.