VAG Diagnostic Gateway Cable MFD15 GEN2
Allows the diagnostic socket to remain free
Receives data directly from the drivetrain instead of the diagnostic bus
The VAG Diagnostic Gateway cable harness is the consistent further development of our well-known VAG-OBD cable. One end has the 6 and 12 pin Molex connector for our MFD15 display, the other end is a Y-cable, allowing us to loop the display into the gateway. With this cable harness, it is possible to keep the diagnostic socket free and to take Can High/Low as well as 12V ignition plus and ground directly from the drivetrain instead of the diagnostic bus. The advantages are obvious: Data retrieval is accelerated and you can also use this cable harness if you have a freely programmable ECU installed in your vehicle.
- Availability: to order
With subscribing into our free newslerrs you will receive a £10 voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.
