BorgWarner AirWerks S300SX-E 87/80mm Turbo Cartridge
BW part number 13009097054
Genuine BorgWarner AirWerks Turbocharger
Original BorgWarner AirWerks SX-E Cartridges are a low-cost way to rebuild an AirWerks Turbocharger. In the past you always have to buy a new Super Core, which included a new compressor housing. But normaly only the bearings or a turbine / compressor wheel is damaged. Now we offer you as official BorgWarner Performance Distributor exclusive AirWerks cartridges (CHRA).
Notice: When ordering only an AirWerks CHRA, be sure to check if your compressor and turbine housing has no damages, like scratches or cracks inside. Only when your compressor and turbine housing is in good condition, then a new cartridge make sense. Otherwise you need a Super Core or a complete new turbo! The mounting kits for the turbine and compressor housing as well as the exhaust gas and compressor housing itself is always required. If the turbine housing has a wastegate flap, you also need an internal wastegate actuator and a suitable holding plate.
Performance rating: 450 - 825 HP
Compressor housing: None
Compressor wheel: Inducer 64,47mm / exducer 83mm (exakter Wert ist 83,47mm)
Turbine housing: None
Turbine wheel: Inducer 79,76mm / exducer 73,37mm
- Only CHRA, the turbine and compressor housing must be used from your older AirWerks turbocharger or purchased separately
- Forged milled aluminum compressor wheel with extented tip technology
- Integrated speed sensor port
- High Flow compressor housing
- Fits for BorgWarner AirWerks S300SX-E turbine housings with 80mm turbine wheel
Turbine housing and compressor housing must be purchased separately.
- Product Type: CHRA
- Turbocharger: BorgWarner AirWerksS300SX-E
With subscribing into our free newslerrs you will receive a £10 voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.