Upgrade spacer - chain tensioner for VR6
Aluminum spacer fpr VR6 Turbo upgrades
Necessary when using a compression reduction plate
This CNC machined spacer made of aluminum is used as a chain tensioner to give sufficient space for the compression reduction plate which is used with turbo upgrades.
Technical Specification:
Outer Diameter: 28,9mm
Inner Diameter: 22mm
Height: 11,2mm
Thickness: 3,4mm
The thicker the compaction reducer plate, the thicker the sleeve must be. For a 1.5mm plate with two metal gaskets (0.6mm outer layers), a 5mm sleeve should be sufficient. As a rule: Example calculation: 3mm plate and 2 metal head gaskets makes a total of 4.2mm and when compressed it is about 4mm. Multiplying this by 2 gives 8mm -> The sleeve should then be 8mm thick (with sealing rings). Without rings 6mm.
- Vehicle manufacturer: VW
- Engine Part: Space Chain Tensioner
With subscribing into our free newslerrs you will receive a £10 voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.