Any questions about this product? Call us at 0161 50 33 8 33.
Turbo Heat Shield EVO 4-9 | PTP

Item number: FPRO35-085-01M

£ 170.76

including 20% VAT. , plus shipping


 Stock:
1
 Shipping time
Available now!

Turbo Heat Shield EVO 4-9

Turbo blanket for thermal insulation

Protective and performance enhancing

PTP Turbo heat protection blanket insulate the heat produced by your turbocharger. With the aim to keep this heat in the turbine housing and to improve the response behaviour, to keep the intake temperature cooler to protect the components in the engine compartment, as well as to extend its service life and to achieve more just more engine power.
When the heat from the exhaust gases in the hot side of the turbocharger is isolated from the cold side of the turbocharger and the intake, more oxygen in the same volume of air is introduced into the engine, resulting in increased engine power.
PTP turbocharger heat protection blankets were tested at the University of Austin Texas 2016 for a study. Link to study
The results speak for themselves. Better turbocharger response, bearing housing temperatures remained virtually unchanged, improved spool-up time after shifting, reduced pressure drop during switching and thermal relief of components outside The turbo blanket clearly showed why a PTP Turbo Blanket Always Should be fitted.

For vehicle:
Mitsubishi Evo 4-9
They also fit many aftermarket turbochargers with internal wastegate.

Colour: Lava (original material color)

PTP Heat protection materials:
Silicone impregnated fiberglass
Calcium Magnesium Silicate Wool in the inner area

PTP Thermal tolerances:
Inner surface:
Maximum temperature load: 1100°C
Continuous temperature loading: 1000°C

Outer surface:
Temperature limit of direct contact heat: 316°C
Temperature limit radiant heat: 593°C