Turbo Blanket - Silver - Various Models
Turboblanket for Heat Insulation
Protection and Performance Increasing
PTP Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.
In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.
PTP turbocharger heat shield blankets were tested at the University of Austin Texas 2016 for a study. Link to the study
The results speak for themselves. The PTP Turbocharger blankets improved the efficiency and the thermodynamic performance of the engine in all its aspects. Improved turbocharger response, bearing housing temperatures remained almost unchanged, improved spool-up time after the shift, reduced pressure drop during the shifting process, and thermal relief of the components outside the turbine housing clearly demonstrated why a PTP turbo blanket always should be used.
Color: silver
PTP Turbo Blanket Materials:
Silicone Impregnated Fiberglass Outer Shell
Calcium Magnesium Silicate Wool Inner Core (secured with Stainless Steel Wire Mesh)
Stainless Steel Capstan Rivets
Stainless Steel Wire Fasteners
PTP Turbo Blanket Heat Tolerance:
Interior Surface:
Max Temperature Rating: 2012 Deg F / 1100 Deg C
Continuous Use Limit: 1832 Deg F / 1000 Deg C
Exterior Surface:
Direct Contact Limit: 600 Deg F / 316 Deg C
Radiant Heat Limit: 1100 Deg F / 593 Deg C
With subscribing into our free newslerrs you will receive a £10 voucher for your next order. The newsletters are a selection of technical informations, news about new products and special promotions. You can unsubscribe for free at any time.
