30° Stainless steel pipe bend 40mm unexpanded
Universal stainless steel exhaust elbow with for exhaust systems
Manufacture stainless steel pipe bend for exhaust
Our universal stainless steel pipe bends are ideally suited for the construction or repair of exhaust systems as well as charge air lines or similar applications. The bends are made of annealed stainless steel tube material and bent on state-of-the-art mandrel bending machines to avoid buckling in the bend and thus ensure the same inner diameter in the bend itself.
All bends come without widening or slitting at the ends. You can use the full length of the bend and have no transition edges as with plugged pipes.
Bending / Angle: 30 degrees
Diameter Standard specification: 40mm (measured outside)
Diameter exact: 42mm in curve / 40mm at end (measured outside)
Wall thickness: 1,5mm
Total length: 20cm +/- 1cm
The pipe bends may have scratches due to storage. This is irrelevant for the construction of exhaust systems. We do not supply show-and-shine tubes or construction tubes for third-party applications. The 40mm pipes are actually 42mmm pipe bends, which were compressed at the ends (about 5cm long) to 40mm.