FIS CONTROL MMI - (N)ONE DISPLAY FOR ALL
Audi Multifunction Display in the Navi
Display OBD values in the Navigation SystemThe FIS-Control MMI enables the custom & individual display of various measured values and status information on the display of the MMI 3G (high or plus). Currently there are only the following functions available:
- Visualization of three measured values as a round instrument
- Tabular display of up to 10 readings
- Notifications from an Android smartphone (Email and WhatsApp)
Already supported vehicles:
- Audi A1 8X
- Audi A4 8K
- Audi A5 8T
- Audi Q5 8R
Operation:The FIS-Control MMI is operated via the original multifunction buttons of the steering wheel.
Description:The peculiarity of the FIS-Control MMI is that, strictly speaking, it is not a finished product, but a device that can be flexibly configured according to customer requirements and which can be extended by software updates. In principle, all measured values can be read out from the control units and displayed. The design of the circular instruments can be freely designed by exchanging the background graphics and the pointer graphics.
However, this flexibility also means that the FIS-Control MMI is not ready for use immediately after installation. The firmware, the graphics for the desired design, and a configuration file are transferred to the FIS-Control MMI via an Android-App. It works wirelessly via Bluetooth.
|Gauge Value:||Exhaust temperature Fuel pressure various Throttle position Pressure various Pressure of air suspension Boost pressure Lambda OBD II Oil Pressure Oil Temperature Voltage Temperature various Time & Date water temperature|
|Value:||Exhaust temperature Boost pressure Lambda Oil Pressure Oil Temperature other water temperature|